Suggested surfaces :
Suitable for all interior wood surfaces except
floors
Panels
Wooden ceilings
Instructions :
coating :
1 liter covers 8 to 10 square meters with two layers
Surface preparation:
Remove any dirt, oil and wood dust from the surface.
New wooden surfaces:
Sand the surface with # 80/120 sandpaper.
Thoroughly clean the dust created.
Uncoated wood surfaces:
Sand the weathering surface with sandpaper # 80/120.
Thoroughly clean the dust created.
Coated wood surfaces:
Do not apply the product directly on pre-coated surfaces.
Remove the old paint / varnish completely from the surface with sandpaper.
Thoroughly clean the dust created.
Application :
This product is ready to use and does not need to be diluted.
Stir the product thoroughly before use and check that it is homogeneous. Repeat this process throughout the program.
Brush the product in 2 layers and wait for 24 hours between layers.
Do a little sanding with 180/220 sandpaper between the layers.
Wait 24 hours for it to dry.
Maintenance (when the same product was used before):
Do not apply the product directly on pre-coated surfaces.
Thoroughly clean the wood surface of dirt and oil and apply a light sandpaper.
Thoroughly clean the dust created.
Depending on the weather conditions, repeat the same procedure as described in “Application” with 1 or 2 layers.
Inspect annually and maintain if necessary.
Instructions :
For external and internal use.
Not suitable for flooring.
If not in use, keep the product closed.
The general application temperature of the product is between 15 to 25 degrees Celsius and 40 to 65 percent in relative humidity.
The moisture content of the wood should be a maximum of 12.
Do not use the product in direct sunlight or rain.
Do not use flaxseed oil, primer / primer, yacht varnish before or after coated surfaces.
This product should be stored at a temperature between 5 and 35 ° C.
Painting tools should be cleaned after use with oil thinner.
Security considerations :
Use with proper ventilation.
Keep out of reach of children.
Do not transfer contents to other containers for storage.
Do not use empty plastic cans for other purposes.
Open windows and doors to prevent overexposure, or use other means to ensure fresh air enters during use and drying.
Avoid contact with eyes and skin.
Wash hands after use.
First aid: In case of contact with eyes, rinse immediately with plenty of water. See your doctor if irritation persists. If swallowed, contact poison control center, hospital emergency department or physician immediately.
Dispose of plastic contents / cans in accordance with national regulations.
Please refer to the Product Safety Data Sheet (SDS) for safety and health information.
Reviews
There are no reviews yet.